Welcome to the CNWHS Photo Gallery!

The C&NWHS invites you to post C&NW and related railroad photos. Like to add your photos?


1501-2.jpg
C&NW #10481 Standard Wood Caboose696 viewsSecond Place in the modeling contest at the 2005 meet in Mason City. HO Model by Dave Casey.
CGW_NW2_900.jpg
Caboose CGW NW-2 #612168 viewsCGW HO brass caboose, with the new Microscale CGW decal set. Gary Groat
NW2_caboose_900.jpg
Caboose CGW NW-2 #614471 viewsCGW HO brass caboose, using the Microscale CGW decal set. Gary Groat
1602_Carlson.jpg
Caboose C&NW #6113510 viewsThis model started out as a Walthers cupola caboose. Many scratch built parts, grab irons and end railings were applied to the model.
Model by Stephen Carlson.
Second place in the caboose catagory at the 2007 meet in Huron, SD.
1603_Moe.jpg
Caboose CGW #215347 viewsThe model is a Quality Craft kit with added parts.
Gregor Moe model.
Third place in the caboose catagory at the 2007 meet in Huron, SD.
1601_Christensen.jpg
Caboose M&StL #1112419 viewsThe caboose was made from a AMB kit, with scratch built brake rigging, grab irons, and end railings.
Model made by Ron Christnsen.
Frist place in the caboose catagory at the 2007 meet in Huron, SD.
Drovers Car  re-size.jpg
Drovers Way Car540 viewsMy model is built in O scale from basswood and Styrene and is based on an article in the CNW Historical magazine. Tom Houle model and photograph.
1502-3.jpg
Model CGW Caboose #612548 viewsThird Place in the modeling contest at the 2005 meet in Mason City. N Gauge Model by Mel Purdom.
1503.jpg
Model M&STL Bay Window Caboose #1134737 viewsFirst Place in the modeling contest at the 2005 meet in Mason City. HO model by Ron Christensen.
The caboose was made from a AMB kit, with scratch built brake rigging, grab irons, and end railings.
3rdwaycar_caboosea.jpg
Transfer Caboose CGW 176352 views3rd Place Waycar/Caboose at the 2008 model contest. The model was built by Gregor Moe.
The caboose started with a base from Athearn, built cab,
boxes and handrails were Scratch built.
waycar.jpg
Way Car 10734 model412 views2nd Place Waycar/Caboose at the 2008 model contest. Model built by Ron Christensen.
This started as a Mullet River car kit. Interior, under frame detail, and end detail were scratch built and added.
1st_caboosea.jpg
Waycar CNW 11175 model471 views1st Place Waycar/Caboose at the 2008 model contest. Model by Dennis Eggert.
Started out as a Walthers way car, the paint was stripped, new scratch built end platforms, steps, roof walk, and ladders were added.
The trucks were changed to friction bearings, and the ouplers and draft gear were replaced
12 files on 1 page(s)